Nov 17, 2017. Long story short second repair company after two three to four visits finally identify the problem with a Daikin tech rep to be the condenser coil in the outdoor unit and. This covered a total replacement installation in 2009 of: a Furnace/Coil downstairs; heat pump/air handler unit upstairs; two outdoor units.

• Welcome to HVAC-Talk.com, a non-DIY site and the ultimate Source for HVAC Information & Knowledge Sharing for the industry professional! Here you can join over 150,000 HVAC Professionals & enthusiasts from around the world discussing all things related to HVAC/R. You are currently viewing as a NON-REGISTERED guest which gives you limited access to view discussions To gain full access to our forums you must; for a free account. As a registered Guest you will be able to: • Participate in over 40 different forums and search/browse from nearly 3 million posts.• Post photos, respond to polls and access other special features• Gain access to our free AOP (Ask a Professional) Section to get real answers for your questions.

All this and much more is available to you absolutely free when you; for an account, so today! We suggest not registering using an AT&T, BellSouth, AOL or Yahoo email address.

If you have any problems with the registration process or your account login, please. • Disaster Relief Assistance is avalible on HVAC-Talk. Quick Navigation • Site Areas • • • • • • • Forums • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •.

Just run off and tested at KIG in August 2017 is this nice 2005 Temptek Air Cooled Chiller. This 1.0 HP unit has a new pump seal installed by us (it was leaking just very slightly), an internal reservoir, a Watlow controller set up for -2°C / 28°F glycol temps, an internal bypass flow valve, a new temp probe installed specifically for 28°F range operation, and is ready to ship. We have run the unit extensively.

This is an indoor chiller, and can be used for higher temp manufacturing applications as well. Chillers are all we do.

We ship about 200 chillers per year (new and used) to customers all over the USA. Let us know what you need. Not all units are always listed.

Some covers are off for photos. Controller is set in centigrade temp units. If running glycol / brewery temps (about 28°F and 40% glycol needed), unit will achieve about 6,000 to 7,000 btu/hr.

If running straight water and industrial temps (about 55°F), unit will achieve about 12,000 btu/hr. Model: CF-1A Serial No. 94192 Date of Manufacture: 8/10/2005 208/230 volt single phase 11.3 amps Pump seal replaced Run and tested R22 refrigerant (ships with full charge). Arrived at KIG in December 2015, we have three (3) Zarsky / Cold Shot 5 ton Air Cooled Chillers.

460 Volt, 5 hp Copeland compressor, OUTDOOR rated, and LOW TEMP (28°F fluid temp) capable. Reservoir tank, process pump, plate style heat exchanger. Units will be run and tested completely at 28°F (if needed) at our 13,000 square foot facility prior to shipping, and offered with money back guarantee.

** Not the size, voltage, or style you want? Not all of our inventory is always listed, and we can quote you a brand new chiller also, typically with a 4 to 5 week lead time ** ** If your application is an indoor, 'standard temperature' chiller, we can offer this unit at a discounted price ** Photos are of prior 5-ton Cold Shots that have come through our shop. We go through them thoroughly, both mechanically (we will run for at least a week, and fix anything that needs fixing) and cosmetically (unit is completely repainted Cold Shot green), and re-insulated as needed.

These units are on our refurbishment schedule - please check with us on lead time! Arrived at KIG in April 2017 is this never used surplus Dual Compressor 6 ton Riedel Air Cooled Chiller. Unit is 460 volt 3 phase power. Dual compressors Model MTZ-36. We have two of these units. Although originally set up for a 'dual zone' laser machine application (where the 2nd smaller zone 'steals' some flow and cooling from the primary), we are modifying this to be a conventional industrial chiller with a single process pump. Unit is wonderfully engineered, and although not intended to be out in the elements and precipitation, it has enhanced hi/low ambient, so it can run in -4°F to 106°F ambient conditions.

(If you are within this range, you can put outdoors under a structure/roof). Unit has a 37 gallon tank, uses R407c refrigerant, and we set these up for 48°F to 80°F process temps. Amazingly engineered German units. Photo is of the exact model number. Might be different serial number, as we have/had several of the PC160 chillers. *** Not the size, voltage, or style you want? Not all of our inventory is always listed, and we can quote you a NEW chiller made-to-order also, typically with a 4 to 5 week lead time.

Let us know if you have any QUESTIONS ABOUT YOUR APPLICATION *** Model: PC160.01-NZ-DIS R407C refrigerant 21.5 Kw net refrigeration capacity (about 6 tons) 2 Compressors (Danfoss MTZ-36 Dual) 2 Pumps (one will be disabled/removed) Primary insulated reservoir capacity: 37 gallons 460 Volt 3 Phase Power, 31.5 Amps Weight: 350 kg. Arrived January 2017 to KIG is this great USA-made ChillKing 6 hp / 6 ton Glycol Chiller. This unit has a single scroll compressor, a stainless tank, the ChillKing 'no freeze' evaporator coil, uses R410a refrigerant, and it's outdoor rated for various USA climates and weatherproof - but fine for indoors too. We run and test all our refurbished glycol chillers at 28°F fluid temp. Let us know what you need, as not all our inventory is listed. Check out our NEW chillers too, in the New Air Cooled Chillers section.

Model: GC60CK3 Year of manufacture: 2011 60,000 BTU scroll compressor At 28°F Glycol temps, achieves about 28,000 BTU/hr 208/230V 3 phase, 29 amps, max fuse 44 amps 1 hp pump rated up to 47 GPM/49 PSI max R410a refrigerant 44 gallon stainless tank, insulated Glycol level switch and audible and light alarm added by KIG in our shop. About 48' wide x 75' long x 39' tall x 900 lbs. This configuration is the 'horizontal' low profile design. Will be run and tested at KIG prior to shipping. Currently in the middle of its refurbishment here at KIG is this nice 15 ton Thermal Care portable Air Cooled Chiller. This 460 volt unit is being stripped down, cleaned, completely repainted, new controller screen added, and will be run and tested for a solid week before shipping.

It will look and run like a new unit. Has process pump and internal tank. This is an indoor unit, BUT has blower option for added CFM so it CAN BE DUCTED TO THE OUTSIDE. Super for manufacturing or other cooling applications. Typical setpoint is 30°F to 65°F. We will run and test the unit extensively before shipping, and sold with money back guarantee. Check with us on lead time for this specific unit.

We have many others too. NOTE: Photos are from similar Thermal Care units which we have refurbished over the years. Arrived at KIG in February 2017 is this never used surplus chiller package consisting of a 2011 20 ton Legacy (virtually identical to Drake) Air Cooled Chiller and Remote Condenser. Dual 10 hp Scroll Compressors, 460 volt power.

NEVER USED * 0 Hours *. This arrangement has the chiller controls, pumps (there are two pumps: one for process - 5 hp - and one for evaporator - 3 hp), and reservoir tank indoors (although, this section too is outdoor rated if desired). The Condenser is mounted outdoors. This is ideal for many applications, one being a year round process cooling application where the user wants to stay with water as opposed to glycol as the cooling fluid. Requires field installation of refrigerant lines between chiller and condenser and wiring too, and a technician that knows how to charge these lines correctly (we would consult/advise as needed). Uses the new R407c blended refrigerant (no R22!). Has the COATED COILS upgrade/option for ultimate protection even in coastal applications.

Amazing deal for the chiller user that can appreciate this configuration. In its present form, the condenser does not have the 'low ambient' winter package with fan switching/VFD controls to allow to run in less than 40°F ambient conditions. If you are in the cold winter environment, consult with us on cost to add this, or you can have your local contractor install also. Unit is 'economizer' ready. It has switch, piping and plumbing, and solenoid valves to direct flow as needed to a 'free cooler' / liquid cooler in winter months if the temperatures support it, so you don't use your refrigeration energy. That module is not included, and can be obtained from various suppliers like KRACK or similar if you are in a cold environment and interested in that feature. Because this is a split/remote condenser '2 piece' chiller system, this offer is for an untested system as-is.

For an added fee we can make the connections in our shop and run and test, but this is a substantial project for a non-packaged chiller system. Let us know if interested. Arrived at KIG in October 2017 is this amazingly clean 2012 Trane Air Cooled 40 ton CGAM Chiller.

Unit is 208/230 volt, 3 phase, has low ambient option for colder climates (if needed), and with its electronic expansion valves this unit can run glycol temps in the 25°F range. We will run, test, and demo the unit here in our 13,000 square-foot facility. Model: CGAM040 Serial No. U12E29967 Super Clean Condition 4 Scroll Compressors Low Ambient/VFD for 2 of the 4 fans R410a Refrigerant Brazed Plate Exchanger Electronic Expansion Valves and Glycol Capable for temps 25°F range 208/230 volt, 3 phase Mpacity 198/max fuse: 225 Voltage utilization range: 187-229 Will be run, tested and checked thoroughly here at KIG Unit is stored indoors. Arrived at KIG in March 2016 were three never used, never installed, 2014 Koolant Koolers / Dimplex Thermal 1/2 ton Air Cooled Chillers. (2 units were 115V, the other was 230V). The chillers were in their original crates.

It is a robust, full-featured USA made indoor portable chiller with a pump and tank, and offered with money back guarantee. All units were run and tested completely at our 13,000 square foot facility prior to shipping. Model: JHI-500-M 115V, single phase 5 gallon reservoir tank 1/2' fluid connectons 50°F to 95°F ambient Fluid temperature: 50°F to 80°F Amps: 17 amp draw / 20 amp breaker 21' x 22' x 28', 300 lbs R134a refrigerant.

Arrived at KIG in April 2016 was this Nice Advantage Air Cooled Chiller. This 1.5 hp unit has a brand new stainless process pump installed by us, an internal reservoir, and a brazed/plate heat exchanger.

Chiller was run and tested extensively, as well as added new insulation. It can be used with water for standard manufacturing (in which case we will limit controller setpoint to 45°F), or it can be used with a 30% glycol mix for a lower temperature application like a brewery - in which case we will set it up with a 20°F minimum setpoint. This is an indoor chiller, designed to be in an indoor warehouse/facility environment.

It is designed for closed loop flow. Please see the videos posted of its sister unit recently shipped out. Advantage 1.5 hp Air Cooled Chiller Serial No. 35424 Pump and Tank Adjustable internal bypass for flow 208 volt single phase Side covers off for photos Run and tested Photos show no insulation on internal piping. Insulation will be installed on all internal piping Note: If we set this up for 28°F brewery/winery application, please understand that the effective cooling it will supply is about 50% of nominal.

So, this 1.5 hp (ton) x 12,000 BTU's = 18,000 btu's nominal, which is about how much cooling will be supplied if you run a general industrial application at about 55°F setpoint. For a brewery application running at 28°F fluid temp, this will supply about 9,000 BTU's of cooling. This de-rating holds true for all chillers, albeit at different percentages depending on technician's opinion, as well as compressor type and quality of insulation supplied in chiller. Run-off videos of unit recently shipped.

Arrived at KIG in March 2016 was this never used, never installed, 2014 Koolant Koolers / Dimplex Thermal 1.5 ton Air Cooled Chiller. This unit is in original crate, and is a solid USA made indoor portable chiller with a pump and tank, and offered with money back guarantee. Unit was run and tested completely at our 13,000 square foot facility prior to shipping.

Model: JHI-1500-CE-M Serial No. 40938 460 volt, 3 phase power 10 gallon reservoir Indoor design with ambient range of 50°F to 95°F 26' x 31' x 36' tall, 500 lbs Brazed plate heat exchanger Fluid setpoint range 50°F to 80°F R134a refrigerant Pump at factory set to 4 GPM / 50 PSI. Arrived at KIG in March 2016 were these three never used, never installed, 2014 Riedel 2 Ton Air Cooled Chillers. This German made unit is wonderfully engineered with a nice Danfoss/Maneurop Hermetic Reciprocating Compressor, many redundant features, and a high end 1.7 hp Grundfoss Pump. The unit was originally intended to cool a Trumpf laser/punch machine, but we are making some slight modifications including adding a terminal block for incoming 460 volt power, and a power supply for the onboard controller; so this is a truly packaged portable unit capable of cooling any basic industrial application.

This is an indoor chiller. Again, we can't say enough about the quality. See the run off videos of first unit shipped!

Units were run and tested at 42°F to 70°F fluid temp range at our 13,000 square foot facility prior to shipping. Model: L0/5 TR2 Mfg Part #: MN 1708263 460 Volt, 3 Phase 6.1 Amps R134A refrigerant CE Approved Run-off videos of first unit shipped. Arrived at KIG in March 2016 was this 2015 Koolant Koolers 2 Ton Air Cooled Chiller. This is a clean design and USA built. This unit was returned from the customer because they ordered the wrong size, as a precaution Koolant Koolers re-tested unit.

230 volt single phase power. 1 hp process pump and reservoir tank. Run and tested prior to shipping, and sold with money back guarantee. Model: SVI-2000-M Serial No.

W005307-001 Indoor Unit 1 hp pump - 10 GPM at 35 PSI and 20 GPM at 25 PSI 8 gallon tank Fluid temperature range: 50°F to 90°F Ambient temperature range: 50°F to 95°F Connections 1.25' NPT Min amps 29, max breaker 43.5 230 volts, single phase, 60 Hz R407C refrigerant Mfg date: February 2015. Arrived at KIG in July 2015 was this nice 2006 Advantage Air Cooled Chiller. This unit has its own process pump, an internal reservoir, and a brazed/plate heat exchanger. We have run and tested this chiller extensively. It can be used with water for standard manufacturing (in which case we will limit controller setpoint to 45°F), or it can be used with a 30% glycol mix for a lower temperature application like a brewery - in which case we will set it up with a 20°F minimum setpoint.

This is an indoor chiller, designed to be in an indoor warehouse/facility environment. It is designed for closed loop flow. Model: M1-2A-CH Serial No.

96626 Date of manufacture: 7/5/2006 230 volt 3 phase 4.5 amps Refrigerant: R22. Arrived at KIG in December 2016 were these two immaculate 2010 Koolant Koolers 3 hp (3 ton) Air Cooled Chillers. Units have stainless cabinet, 3 hp scroll compressor, pump, tank, and loaded with options. We have run the first unit as high as 80°F setpoint, and also down to 28°F glycol temps. These are INDOOR chillers, and were run-off and tested at our 13,000 square foot facility prior to shipping, and offered with money back guarantee. Model: JH1500-BP-SO Serial Number: 310__ 3 hp, '3 ton' - indoor unit R134a refrigerant 480 volt, 3 phase, 60Hz 10.2 min circuit, max breaker 15 amps 3 hp scroll compressor 1 hp chiller pump Brazed plate exchanger Stainless construction Flow switch Fluid pressure gauge.

Arrived at KIG in March 2016 was this 2014 Koolant Koolers 3 Ton 'AVI Series' Air Cooled Chiller. This is a robust design and USA built. This unit was new, never used, in original crate. It features a cleanable heat exchanger where the plates can be disassembled. It is ideal for dirty fluid or problem fluid, yet fine for clean water/fluid of course too.

It has a 1 hp pump and is a 'tankless' design, intended to draw from your tank/reservoir, through the heat exchanger, then back out to your process or holding tank. Unit has the onboard fluid filter option - see photos. This is an indoor chiller, with fluid setpoint range of 50°F to 90°F. R407C refrigerant. Run and tested before shipping, and sold with money back guarantee. Model: AVI-3000-M Serial No. 41066 Mfg Date: December 2014 1 hp pump (TANKLESS.

Draws from your reservoir) 460 volt, 3 phase power R407C refrigerant Cleanable heat exchanger (can be dismantled) Min amps 12, Max amps 20 50°F to 95°F ambient indoor temp Fluid setpoint range: 50°F to 90°F. New arrival to KIG in 2015 was this perfect pre-owned 3 ton Koolant Koolers/Dimplex Thermal Air Cooled Chiller. This unit was never connected to power and is in NEW condition, with 0 hours. It has a nice Ranco controller, a Sanyo Scroll Compressor (which is actually 3.5 hp) and an upgraded process pump of 2 hp.

Reservoir tank with submerged heat exchanger. Even though 0 hours, this unit was powered up, run, and tested at KIG prior to shipping to make sure everything was still tight and leak free, and a run-off video provided.

Model: KV3000 Serial Number: 27629 3.5 hp Sanyo Scroll compressor w/ crankcase heater 2 hp process pump Reservoir tank 230 volt / 60 hz / 3 phase / 22.6 amp Full charged, tested, ready to run Complete manuals, prints, and CD. Arrived at KIG in October 2015 was this excellent condition 5 ton SAC Air Cooled Chiller. Unit saw very little use. It was run and tested in our Massachusetts shop prior to shipping.

Model: SAC-05 BTU: 60000 220V, 60HZ, 3ph. Also good for 208/230v R407C Refrigerant Copeland compressor Plate Heat Exchanger Heavy duty industrial pump 35 PSI Fully insulated stainless steel tank Microprocessor control, fully digital display, and fill diagnostics panel Temperature can range from 4.4°C To 25°C (39.9°F to 77°F) Low flow bypass, max flow rate 30 GPM Stainless steel piping, inlet & outlet 1' Unit Weight: 750 lbs.

Unit Dimensions: 59' x 35' x 64'. Arrived at KIG in October 2015 was this 5 hp / 5 ton Air Cooled Chiller Split w/ Remote Condenser. This is a great solution for a manufacturer, or brewery/winery that wants the heat from the process dissipated outside - and chiller, controls, tank, tank etc. In the facility.

This unit was never connected to power and has 0 hours. It uses a Copeland 5 hp compressor and has hot gas bypass and low ambient feature, so this will operate even when 0°F outside.

We can configure & run/test unit in our shop at 28°F for your brewery/winery application; equally as fine for a manufacturing operation which uses higher fluid temps. Although run and tested here, the system required field refrigerant piping installed & charge added, as it is SPLIT with the condenser going outside. Mfg: Temperature Corporation Model: RCAC-5 Serial No. 1003-445 40 amp fuse 208 Volt / 3 Phase Power Refrigerant: R22 Low Ambient Option Capable down to 28°F Hot Gas Bypass Insulated Tank, Process Pump Brazed Plate Exchanger We have complete manual and documentation. Acquired by KIG in March 2015 were these four similar Advantage 5 ton Air Cooled Chillers. Units were in storage for most of their lifetime. Each is 230 volt / 3 phase, has 5 hp scroll compressor, a brazed/plate exchanger, 1.5 hp process pump, and condenser/fan.

Units do not have a reservoir tank, and the electrical configuration (for this auction) is set up to receive a start/stop signal from your process. The chillers in this arrangement are ideal for facility/plant that has a central reservoir tank. The chiller will suction from your tank and flow through chiller and discharge back to your tank. The start/stop of compressor will be controlled by a signal/contact you send (unless you purchase the controller upgrade; see below).

Nozzle Pro Download Crack For Gta there. Please note, on one unit a temperature gauge is missing, we will replace. The lot photo shows one unit without a top cover, but we have that cover. ALSO: if you want a temperature controller added, we will install a new Ranco temperature controller on each unit for $375 per unit. Model: MK-5AYR-21HFX 230 volt 35 Amps 1.5 hp process pump. These 5 ton Koolant Koolers chillers went through refurbishment here at KIG.

Units were stripped, cleaned, painted, run and tested. They feature a robust tube type rectangular exchanger which is cleanable. A new Ranco controller has been installed. Fabricated and installed a new stainless reservoir tank, and an appropriate centrifugal water pump (see photos of pumps).The units were piped in a 'closed loop' configuration. We can provide the unit without a tank, for an open loop application for a reduced price (meaning, the suction side of the pump receives fluid from your tank and the chilled fluid discharges open loop style into your tank or reservoir).

The units have brand new air filters. The video links here are of prior unit just shipped (it had no tank). Model: HAV-5000-SP-CL-SO-FILT Serial No: 10485 and 11129 460V, 3 Ph, 60 Hz, 14.4 Amp Compressor HP: 5.6 Pump HP: 2.0 Refrigerant: R22. Arrived at KIG in January 2017 was this never used surplus Dual circuit 6 ton Riedel Air Cooled Chiller.

Unit is 460 volt and a customer dual circuit design for laser machine. This one is intended for IPG lasers models YLS 4000 thru YLS 7000. It has two tanks, two pumps, and two Danfoss compressors Model MTZ-36. Okay for other lasers too, but a bit specialized for non-laser applications.

PC160.01-NZW-DIS Model: 2KP38 Serial No. Arrived at KIG in July 2015 was this pristine 2012 ChillKing 6 ton air cooled water/glycol chiller. This unit was on the roof of a frozen yogurt business. Crack Fm 2014 Pc. It is 208/230 volt, 3 phase, has a 6 hp Copeland Scroll Compressor, 1 hp process pump, and 77 gallon stainless reservoir with coil type heat exchanger. This unit is OUTDOOR rated and has LOW AMBIENT option too, so this can operate year round in colder climates and equally as fine for warm climates too.

The unit can be used for applications ranging from winery, brewery, frozen yogurt, plating/anodizing, manufacturing (injection molding), etc. This chiller was run and tested extensively at KIG's 13,000 square-foot facility before being shipped out. Model: GC072CK3 Serial No. CK12C2242 72,000 BTU/HR at 95°F degree ambient and 55°F degree water out Electrical: 208/230V, 60hz, 3 phase Minimum Circuit Ampacity: 34, Maximum Fuse Size: 52 Amps One 77 gallon stainless steel tank with ChillKing evaporator coil inside 1 HP water pump: 47 GPM max, 49 PSI max R410a Refrigerant One 72,000 BTU/HR Copeland scroll compressor Approximate shipping weight 950 lbs. Dimensions: 48-1/4' wide, 74-1/4' long, 42-3/4' tall Decibels: 78 Outdoor Rated Low Ambient Option Level switch in tank leading to contact/timer for make up water fill. Arrived at KIG in March 2016 was this never used, never installed, 2013 Koolant Koolers DVI-7500-M 7.5 ton 'Drop-In' Air Cooled Chiller. This 460 Volt INDOOR chiller is designed to be lowered into your existing process tank for your process.

There are two coil heat exchangers to be submerged in your oil or water-soluble fluid. Each heat exchanger has a rotating agitator. Unit features a 7.5 hp scroll compressor, uses R407c refrigerant, and some nice Carel controls. Brand new in original crate. New, never used, in original crate! Model: DVI-7500-M Serial No.

38743 Drop-In Chiller 460 volt 3 phase power 23 amps, max breaker 40 R407c (18 lbs) Dual agitator motors Indoor rated Mfg Date: December 2013. Arrived at KIG in July 2015 was this pristine AEC-Sterling-Sterlco 7.5 ton Air Cooled Glycol Chiller. This 208 volt unit is designed specifically for lower temperature applications in the 0°F to 30°F setpoint range, and according to AEC has a heat exchanger sized specifically for it, in addition to added insulation internally.

It has a 7.5 hp Copeland Scroll Compressor. It is designed for closed loop flow to your process.

Please take into account de-rating of the actual cooling capacity (approx 25% to 35%) when cooling at lower temperatures like this. Has a 1 hp process pump. Unit was run, tested, and checked out thoroughly in our MA shop prior to shipping. Note 1: See photo of the coil fins. We took off filter cover so you can see how clean/new it is. Note 2: This is an indoor unit. Please contact us if you're in need of an outdoor unit.

Many of our chillers are not listed yet. Model: SMCA7.5 Serial No. 34A0315 208 Volt, 3 Phase 39 amps 7.5 hp Copeland Scroll Compressor 1 hp process pump Low Temperature Glycol Chiller 0°F to 30°F. These chillers went through refurbishment here at KIG. We refurbish and sell many chillers. This unit is approximately the 20th Koolant Koolers chiller which has gone through our shop in the last 3 years. Units have been stripped, cleaned, painted, run and tested extensively with a heated test load.

It features a Trane 7.5 hp scroll compressor, a 1.5 hp process pump, and stainless steel reservoir tank with new insulation mounted below the unit. The exchanger is coil type submerged in the tank. The units have brand new air filters.

Koolant Koolers - Dimplex Thermal - Model HCV 7500 - 7.5 ton Chiller Serial number: 8907 (and 2 others) Dual Condenser Fans 7.5 hp compressor 460 volt - 3 phase - 21.5 amps Refrigerant: R22.